Facebook
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine

Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine

No.ZS630
The clinical mechanism of pixel laser is based on the theory of "minimally invasive wound repair". Skin tissue has the ability to self repair wounds, and when the skin is damaged by trauma, it can self heal and repair.
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine
  • Vertical Stretch marks/Wrinkle Removal Pixel Laser Beauty Machine

Description

Product Paramenters
Working mode
single pulse, continuous pulse, repeated pulse, ultra pulse
Output power
0-60W(adjustable)
Input power
450VA
Laser type
Sealed-off CO2 laser
Laser wavelength
10.6μm
Divergence angle
4mrad
Focused spot diameter
≤0.4mm
Tool bit focus
F=100mm(optional)
Pulse width
0.02-0.99s
Aiming beam
Red diode laser(650nm, 2mW)
Transmission system
Spring-balanced 7 joint arms
Cooling system
Inside-circle coolant
Display screen
LCD
Working environment temperature 
5-40℃
Humidity
<80%
Air pressure
86Kpa-106 Kpa
Input power
AC220V±10%, 50Hz
Preheating-time
>5min
Electromagnet
No electromagnet interrupt
other working environment
No obvious shaking or airflow
N. W.
37kgs
Size
183 (with arms) ×45×40cm

Working Theory

The wavelength of CO2 laser is 10.6μm, which can be fully absorbed by human biology tissue (all the skin are available). The sealed-off fractional CO2 laser, whose output laser-light will be transferred by articulated arm, which has better sense of direction and higher energy density. The CO2 laser operates in the invisible infrared waveband, and an aiming beam is required to see where the treatment beam will impact tissue more recently from a visible red diode laser. When the laser beam go through the focus lens, the produced heat will gasify the target tissue. With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.

Application

(1) Remove acne and acne marks;
(2) Eliminate dry pattern, fishtail, etc around the eyes;
(3) anti-aging: skin firming, wrinkle removal, improve the skin condition;
(4) Treatment of pigmentary lesions such as freckles and ostrum miracles;
(5) Scar: treatment of depressed, old dispersion, convex vascular / fibrous scar;
(6) Stretch marks.

Product performance

Constant temperature system Intelligent Al chip , precise temperature control Ensure a constant temperature of 4 ℃ Output speed Frequency 1-10HZ controllable , pulse output Safety performance When the ratio between the energy value and the frequency value does not comply with the safe output energy density , the system will automatically adjust the safe state.

CONTACT US

If you have any queries, get in touch today! Don't hesitate.
Name
Email*
Phone
Content
Leave a message
Name
Email*
Phone
Content
Message Us